Epec 3606 Control Unit
EPEC 3606 CONTROL UNIT
Epec 3606 Control Unit is a compact and robust multifunction controller with a high calculating power. It can be used as a stand-alone controller for smaller systems or as part of a bigger, decentralized control system. Epec 3606 control unit has 21 I/O pins in total.
The unit’s casing works to protect the electronics against mechanical wear. The leak-proof zinc/plastic housing has also been widely tested against different environmental conditions. The unit is equipped with a signal LED for diagnostics. One CAN is also equipped with double pins to make cabling easier since there is no need for branches in the wire harness.
- Processor: 16/32 bit CPU
- Flash memory: 1,6 Mbyte
- RAM: 138 kbyte
- PLCopen application size: up to 768 kbyte
- CAN: 1 or 2
- I/O: 21 (13 inputs + 8 outputs)
- IP class: IP67
- Temperature range: -40 … + 85 °C
-40 … +185 °F - Connectors: 1 x AMP 35
- CODESYS version: 2.3
- Supported CAN protocols: CANopen, SAEJ1939, ISOBUS
- Two-colored diagnostic LED for quick status check and fault detection
| Symbol / Name | Explanation |
| CE | This product complies with the requirements set in the CE Standard. |
| E17 | This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards. |
| RoHS2 | This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment). |
| AEF HW conformance* | This product has passed AEF HW conformance tests |
* Only for ISOBUS product version E30E3606-23
| Ordering code | E30B3606-21 | E30B3606-01 | E30B3606-02 | E30B3606-31 | E30B3606-23 |
| Technical Manual ID | MAN000551 | MAN000551 | MAN000552 | MAN000590 | MAN000618 |
| CAN | 1 | 1 | 2 | 1 | 2 |
| 5 V REF | 2 | 2 | 2 | 2 | 2 |
| PWM / DO / DI (pull-up resistor) | 8 | - | - | - | - |
| PWM / DO / DI (pull-down resistor) | - | 8 | 8 | 8 | 8 |
| DI / PI | 5 | 5 | 5 | 5 | 5 |
| AI / DI (0-5 V / 0-22 mA) | 4 | 4 | 4 | 4 | 4 |
| AI / DI (0-5 V) | - | - | - | - | - |
| AI / DI (0-37 V) | - | - | - | - | - |
| FB / AI (1 A) | - | 4 | 4 | - | - |
| FB / AI (2 A) | 4 | - | - | 4 | 4 |
| ISOBUS license | no | no | no | no | yes |
COMPARE CONTROL UNITS
INTERESTED?
information
FINNISH KNOWLEDGE
tested, designed and produced in finland.
Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.
Harsh conditions?
Bring it on!
All Epec control units are designed and manufactured to withstand harsh conditions:
high mechanical shocks and vibration, heat, cold and different chemicals.
