Epec 4602 Control Unit

EPEC 4602 CONTROL UNIT

Epec 4602 Control Unit has a wide range of programmable I/Os for different implementations. Epec 4602 can control 10 hydraulic blocks simultaneously by using 20 PWM outputs and 10 feedbacks. It can be used as a stand-alone controller or as part of decentralized control system.

The unit’s sleek shaped casing works to protect the electronics against mechanical wear. The leak-proof aluminum/plastic housing has also been widely tested against different environmental conditions. The unit is equipped with a signal LED for diagnostics. One CAN is also equipped with double pins to make cabling easier since there is no need for branches in the wire harness.

 

  • Processor: 16/32 bit CPU
  • Flash memory: 1,6 Mbyte
  • RAM: 138 kbyte
  • PLCopen application size: up to 768 kbyte
  • CAN: 2
  • I/O: 68 (44 inputs +24 outputs)
  • IP class: IP67
  • Temperature range: -40 … + 85 °C
    -40 … +185 °F
  • Connectors: 3 x AMP 35
  • CODESYS version: 2.3
  • Supported CAN protocols: CANopen, SAEJ1939
  • Two-colored diagnostic LED for quick status check and fault detection

 

Symbol / Name Explanation
CEThis product complies with the requirements set in the CE Standard.
E17This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards.
RoHS2This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment).
Ordering codeE30B4602-10
Technical ManualMAN000632 (Coming soon)
Programming Manual(Coming soon)
CAN2
5 V REF2
PWM / DO / DI
(sourcing 3 A)
16
PWM / DO / DI
(sourcing 4 A)
4
DI / DO GND4
FB / AI
(2 A)
10
DI/PI
(pull-up / pull-down selection, threshold voltage 3,1 V)
12
DI/PI
(pull-up / pull-down selection, threshold voltage 2,5 V)
1
DI/PI
(pull-up / pull-down selection, threshold voltage 1,25 V)
1
AI/DI
(0-37 V)
2
AI/DI
(0-5 V / 0-22 mA)
14
AI/DI
(0-5 V)
-
AI/DI
(0-5 V, pull-up to +5 V, pull-up resistance selection)
4

FINNISH KNOWLEDGE

tested, designed and produced in finland.

 

Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.