Epec 6200 Remote Access Unit
EPEC 6200 REMOTE ACCESS UNIT
Epec 6200 Remote Access Unit is designed for remote connectivity, assistance systems and edge computing. Epec 6200 has a wide range of communication interfaces and it is in a slim and leak-proof rugged aluminum housing. Three diagnostic LEDs offer you quick status information.
Epec 6200 has edge computing possibilities, such as local data processing, real-time capable applications and utilizing 3rd party Azure Edge modules. Local data processing also enables optimizing and managing the data amounts to be transferred to remote management solutions.
Together with Epec’s IoT Services you’ll get the fastest to configure and most reliable IoT system/remote management solution in the market.
In case there is an occasional need for graphical interface in the machine, with Epec 6200 and WebVisu solution you can use for example a smart phone as temporary HMI when the machine is running.
Available country approvals of Epec 6200 RAU:
- Europeincluding Turkey and Serbia
- Australia and New Zeeland
- USAincluding Puerto Rico, Canada
- Chile, Colombia, Uruguay, Paraquay
- Indonesia, India, Japan
- Saudi-Arabia
- South Africa, Ghana, Tanzania, Zambia, Zimbabwe, Mali
- In progress: China, Brazil, Mexico, Peru
- + 20 other counties on roadmap including for example Argentina, South-Korea, Malesia, Thailand, Vietnam, Philippines etc.
Operators: Telia, Tele2, AT&T, Verizon in progress
- Processor: 32 bit CPU
- Flash memory: 4 or 32 GByte
- RAM: 1024 MByte
- CAN: 2-6
- Ethernet: 2
- USB: 1
- RS-232: 1
- GSM / UMTS / HSPA+/LTE
- WLAN
- GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
- I/O: 5 (3 inputs and 2 outputs or 5 inputs and 0 outputs)
- IP class: IP67
- Temperature range:
-30 … + 60 °C
-22 … +140 °F - Connectors: 1 x AMP23, 2 x M12, 3 x SMA
- CODESYS version: 3.5
- Supported communication protocols: CANopen, SAEJ1939, MODBUS, NMEA 2000
- 3 two-colored diagnostic LED for quick status check and fault detection
| Symbol / Name | Explanation |
| CE | This product complies with the requirements set in the CE Standard. |
| E17 | This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards. |
| RoHS2 | This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment). |
| FCC | This device is authorized under the SDoC procedure and has the option to use the FCC logo to indicate compliance with the FCC rules. |
| RCM | This product complies with the ACMA (Australian Communications and Media Authority) regulatory arrangements concerning electromagnetic compatibility and radio equipment. |
| Radio Equipment Directive | Epec 6000 series units comply with Radio Equipment Directive (2014/53/EU). |
| EU declaration of conformity | This device is in compliance with Directive 2014/53/EU. For more information, refer to the product's technical manual. |
All of the communication interfaces are optional, you can select only the ones you need.
FINNISH KNOWLEDGE
tested, designed and produced in finland.
Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.
