Epec 4602 Control Unit
EPEC 4602 CONTROL UNIT
Epec 4602 Control Unit has a wide range of programmable I/Os for different implementations. Epec 4602 can control 10 hydraulic blocks simultaneously by using 20 PWM outputs and 10 feedbacks. It can be used as a stand-alone controller or as part of decentralized control system.
The unit’s sleek shaped casing works to protect the electronics against mechanical wear. The leak-proof aluminum/plastic housing has also been widely tested against different environmental conditions. The unit is equipped with a signal LED for diagnostics. One CAN is also equipped with double pins to make cabling easier since there is no need for branches in the wire harness.
- Processor: 16/32 bit CPU
- Flash memory: 1,6 Mbyte
- RAM: 138 kbyte
- PLCopen application size: up to 768 kbyte
- CAN: 2
- I/O: 68 (44 inputs +24 outputs)
- IP class: IP67
- Temperature range: -40 … + 85 °C
-40 … +185 °F - Connectors: 3 x AMP 35
- CODESYS version: 2.3
- Supported CAN protocols: CANopen, SAEJ1939
- Two-colored diagnostic LED for quick status check and fault detection
| Symbol / Name | Explanation |
| CE | This product complies with the requirements set in the CE Standard. |
| E17 | This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards. |
| RoHS2 | This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment). |
| Ordering code | E30B4602-10 |
| Technical Manual | MAN000632 |
| CAN | 2 |
| 5 V REF | 2 |
| PWM / DO / DI (sourcing 3 A) | 16 |
| PWM / DO / DI (sourcing 4 A) | 4 |
| DI / DO GND | 4 |
| FB / AI (2 A) | 10 |
| DI/PI (pull-up / pull-down selection, threshold voltage 3,1 V) | 12 |
| DI/PI (pull-up / pull-down selection, threshold voltage 2,5 V) | 1 |
| DI/PI (pull-up / pull-down selection, threshold voltage 1,25 V) | 1 |
| AI/DI (0-37 V) | 2 |
| AI/DI (0-5 V / 0-22 mA) | 14 |
| AI/DI (0-5 V) | - |
| AI/DI (0-5 V, pull-up to +5 V, pull-up resistance selection) | 4 |
COMPARE CONTROL UNITS
INTERESTED?
information
FINNISH KNOWLEDGE
tested, designed and produced in finland.
Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.
