Epec GL84控制器

Epec GL84控制器

Epec GL84 控制器是集中控制系统架构的最佳从属控制器,实现了一个主要/中央控制器对多个从属控制器的控制。Epec GL84 控制器配有多达 27 个用于传感器和执行器的GND 接口。另外, CAN1总线与M12连接器通过路由连接,方便布线。Epec GL84 控制器周期运行时间极快——犹如I/O接口与主要/中央控制器实现了物理连接一样。

新一代的Epec GL84 控制器采用了全新的外壳和连接器解决方案,可在紧凑的外壳内配备大量I/O接口 。控制器的光滑外壳可保护电子设备免受机械磨损。密封的铝制外壳经过大量测试验证,可用于应对各类作业环境,甚至可以防御高压冲洗(IP69 防护等级)。

控制器配有一个用于诊断的 LED信号灯。控制器配备有专门应对高振动作业环境的 LEAVYSEAL 连接器,集成了拉力释放和水平锁定功能。控制器的单线密封 (SWS) 系统可保证电线的安全性和完全密封性。

Epec GL84 Slave Unit is the best slave product for centralized control system architecture where one master/central unit controls multiple slaves. GL84 has a whopping 27 GND pins for sensors and actuators and CAN1 is also routed to M12 connectors for easy wiring. GL84 Slave Unit’s cycle time is extremely fast – it feels like the I/O is actually connected to the master/central unit.

The unit has a new generation housing and connector solution that enables plenty of I/O in a compact housing. The sleek shaped casing works to protect the electronics against mechanical wear. The leak-proof aluminum housing has also been widely tested against different environmental conditions, the housing is even protected against high-pressure washing (IP69).

The unit is equipped with a signal LED for diagnostics. The unit’s LEAVYSEAL connectors have integrated strain relief and lever locking that are designed for high vibration environments. Single Wire Seal (SWS) system also ensures safe and robust sealing for wires.

  • Processor: 32 bit CPU
  • CAN: 2
  • I/O: 69 (35 inputs + 34 outputs)
  • REF pins (5 V): 4
  • GND pins: 27
  • 5 A POWER_DO outputs
  • Total current up to 60 A
  • Three power supply groups – Safety cut-off feature in a group of 10 PWM/DO outputs
  • IP class: IP69
  • Temperature range:
    -40 … + 85 °C
    -40 … +185 °F
  • Connectors:
    2 x LEAVYSEAL 46 pin
    1 x LEAVYSEAL 21 pin
    2 x M12 5 pin
  • Programming:
    User programming not possible
    Device configuring and controlling via Object Dictionary
  • Supported CAN protocols: CANopen
  • Three-colored diagnostic LED for quick status check and fault detection

Symbol / Name Explanation
CEThis product complies with the requirements set in the CE Standard.
E17This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards.
RoHS2This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment).
Functional Safety CertificationTÜV SÜD Certification and EC-Type examination no. Z10 003772 0003 Rev. 02
EN ISO 13849 Up to PL d, Cat 3
EN IEC 61508 Up to SIL 2
IEC 62061 Up to SIL 2
Only in combination with an external safety system reaching minimum SIL 1, Cat 3, PL c
Certification also includes yearly Epec factory inspection
Ordering codeE30SGL84-020
Technical ManualMAN000685
CAN2
5 V REF3
PWM / DO20
DO 5 A4
DO 3 A8
DO (GND) 3 A2
AI / DI15
PI/DI10
PI/DI (threshold 2,6 V)10

Products only for you?

Didn’t find what you were looking for?
We also make customized products according to your specific needs!

Contact us for more information.

sales@epec.fi
+358 (0)20 760 8111

FINNISH KNOWLEDGE

tested, designed and produced in finland.

Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.

By submitting this form you consent Epec to store and process the information submitted.