Epec XS6C控制器

Epec XS6C控制器

Epec XS6C 中央控制器是一款用于集中式智能控制系统的主控制单元。Epec XS6C 控制器最多可配备6 条CAN总线来连接其他多个设备,并同时配备了2个以太网接口来实现诸如物联网解决方案等多种应用。Epec XS6C 控制器的外壳为纤薄、坚固密闭的铝制外壳,并配有3盏诊断用LED灯来快速提供状态信息。

搭配使用 Epec 云服务,您还能实现业内最快的配置部署和最可靠的物联网系统/远程管理解决方案。

如果您临时需要在机器上使用图形用户界面,您可以采用Epec 6200 和 WebVisu 解决方案,通过例如智能手机等载体作为机器运行时的临时人机界面。

Epec XS6C Central Unit is targeted to be used as a master unit in centralized intelligence systems. Epec XS6C has up to 6 CANs to connect it with other devices and 2 Ethernets to enable, for example, IoT solutions. XS6C is wrapped in slim and leak-proof rugged aluminum housing and it’s three diagnostic LEDs offer you quick status information.

Together with Epec’s Cloud Services you’ll also get the fastest to configure and most reliable IoT system/remote management solution in the market.

In case there is an occasional need for a graphical interface in the machine,  with Epec 6200 and WebVisu solution you can use, for example, a smart phone as a temporary HMI when the machine is running.

  • Processor: 32 bit dual/quad core CPU
  • Flash memory: 4 or 32 GByte
  • RAM: 1024 MByte
  • CAN: up to 6
  • Ethernet: 2
  • USB: 1
  • I/O: 5 (3 inputs and 2 outputs or 5 inputs and 0 outputs)
  • IP class: IP67
  • Temperature range:
    -30 … + 65 °C
    -22 … +149 °F
  • Connectors: 1 x AMP23, 2-4 x M12
  • CODESYS version: 3.5
  • Supported communication protocols: CANopen, SAEJ1939, MODBUS, NMEA 2000
  • 3 three-colored diagnostic LED for quick status check and fault detection
undefined
Symbol / Name Explanation
CEThis product complies with the requirements set in the CE Standard.
E17Pending
RoHS2This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment).
EU declaration of conformityThis device is in compliance with Directive 2014/53/EU. For more information, refer to the product's technical manual.
All of the communication interfaces are optional, you can select only the ones you need.

› Technical Manual

FINNISH KNOWLEDGE

tested, designed and produced in finland.

 

Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.

By submitting this form you consent Epec to store and process the information submitted.