Epec 3610控制器
Epec 3610控制器
Epec 3610控制器结构紧凑，共有22个I/O接口，且均可作为输入接口使用。
Epec 3610 控制器配有 一个RS-232 串行端口和一个用于兼容不同装配版本产品的I/O 接口、可兼容之前的Epec2038控制器。
此外，Epec 3610 控制器还开发了一些全新的功能，例如高边电流测量和一个内置三轴加速度计，可用于水平调整等等。
Epec 3610 控制器还设有一个精确 Pt1000 测量功能选项。
控制器外壳可以保护电子设备免受机械磨损。密封的锌/塑料外壳经过大量测试验证，可用于应对各类作业环境。控制器配有一个用于诊断的LED信号灯，还配有一个双引脚CAN总线，无需在线束中设置分支线路，方便布线
Epec 3610 Control Unit is a compact controller containing 22 I/O pins, all of them can be configured as input pins. Epec 3610 has an RS-232 serial port and as an assembly variant, I/O interface that is compatible with the previous Epec 2038 Control Unit. However, Epec 3610 also comes with completely new features like high-side current measurement and an internal 3-axis accelerometer, for example, for levelling purposes. Epec 3610 also has an option for accurate Pt1000 measurement.
The unit’s casing works to protect the electronics against mechanical wear. The leak-proof zinc/plastic housing has also been widely tested against different environmental conditions. The unit is equipped with a signal LED for diagnostics. One CAN is also equipped with double pins to make cabling easier since there is no need for branches in the wire harness.
- Processor: 16/32 bit CPU
- Flash memory: 1,6 Mbyte
- RAM: 138 kbyte
- PLCopen application size: up to 768 kbyte
- CAN: 1 or 2
- RS-232 (optional)
- Accelerometer (optional)
- I/O: 22 (14 inputs + 8 outputs)
- IP class: IP67
- Temperature range: -40 … + 85 °C
-40 … +185 °F - Connectors: 1 x AMP 35
- CODESYS version: 2.3
- Supported CAN protocols: CANopen, SAEJ1939, ISOBUS
- Two-colored diagnostic LED for quick status check and fault detection
| Symbol / Name | Explanation |
| CE | This product complies with the requirements set in the CE Standard. |
| E17 | This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards. |
| RoHS2 | This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment). |
| AEF HW conformance* | This product has passed AEF HW conformance tests |
* Only for ISOBUS product version E30E3610-52
| Ordering code | E30B3610-01 | E30B3610-42 | E30B3610-52 | E30E3610-52 |
| Technical Manual | MAN000667 | MAN000668 | MAN000669 | MAN000681 |
| CAN | 1 | 2 | 2 | 2 |
| RS-232 | 1 | - | - | - |
| Accelerometer | - | - | yes | yes |
| 5 V REF | 1 | 1 | 1 | 1 |
| PWM / DO / DI / CM (pull-down, high-side current measurement) | - | 6 | 6 | 6 |
| PWM / DO / DI (pull-down resistor) | 6 | - | - | - |
| FB / AI (1 A) | 3 | - | - | - |
| AI / DI (0-10 V) | - | 3 | 3 | 3 |
| AI / DI (0-5 V / 0-22 mA) | 5 | 5 | 5 | 5 |
| DO GND/DI (sinking) | 2 | 2 | 2 | 2 |
| DI / PI (pull-down, with hysteresis) | 4 | 4 | 4 | 4 |
| DI / PI (pull-down) | - | 2 | 2 | 2 |
| DI / PI (pull-up to +5V) | 2 | - | - | - |
| ISOBUS license | no | no | no | yes |
纯正芬兰科技典范
芬兰测试，芬兰设计，芬兰制造.
Epec 控制系统百分比芬兰制造。
我们是一家专业提供控制系统和信息系统解决方案的供应商，我们的产品可以应对各类极端的作业环境。Epec用户至上的团队与流程能够满足大型国际客户的需求。
100% FOCUSED ON CONTROL SYSTEMS
We know control systems inside and out.
Epec has 40 years of experience with control systems and we are 100% focused on control systems, nothing else.
Our experienced and motivated control system professionals can help you with any control system challenge, bring it on!
