Epec 5050控制器

Epec 5050控制器

Epec5050控制器是一款能够满足大量I/O接口需求和增强算法应用的理想产品。Epec 5050 控制器配有大量内存空间和可进行各类编程操作的I/O 接口。例如,用户可自主选择 PI 接口的阈值电压,许多输入接口均有上拉/下拉菜单进行选择。

控制器的光滑外壳可保护电子设备免受机械磨损。密封的铝/塑料外壳经过大量测试验证,可用于应对各类作业环境。控制器配有一个用于诊断的LED信号灯,还配有一个双引脚CAN总线,无需在线束中设置分支线路,方便布线。

Epec 5050 Control Unit is ideal for applications that require plenty of I/O and enhanced algorithms. Epec 5050 control unit has also a large memory and its I/O is widely programmable. For example, PI pins’ threshold voltage can be selected and many inputs have pull-up/pull-down selection.

The unit’s sleek shaped casing works to protect the electronics against mechanical wear. The leak-proof aluminum/plastic housing has also been widely tested against different environmental conditions. The unit is equipped with a signal LED for diagnostics. One CAN is also equipped with double pins to make cabling easier since there is no need for branches in the wire harness.

  • Processor: 32 bit CPU
  • Flash memory: 8 Mbyte
  • RAM: 4 or 8 MByte
  • PLCopen application size: 1 or 3 MByte
  • CAN: 4
  • Ethernet: 1
  • I/O: 65 (33 inputs +32 outputs)
  • IP class: IP67
  • Temperature range: -40 … + 85 °C
    -40 … +185 °F
  • Connectors: 3 x AMP 35
  • CODESYS version: 3.5
  • Supported CAN protocols: CANopen, SAEJ1939
  • Two-colored diagnostic LED for quick status check and fault detection

Symbol / Name Explanation
CEThis product complies with the requirements set in the CE Standard.
E17This product is certified with normal automotive (E17) EMC (electromagnetic compatibility) standards.
RoHS2This product complies with the RoHS directive (The Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment).
Edit
Ordering code E30D5050-02 E30D5050-82
Technical Manual MAN000623 MAN000623
CAN 4 4
Ethernet 1 1
5 V REF 2 2
PWM / DO / DI / CM 28 28
DI / DO GND 4 4
DI / PI 22 22
AI / DI 11 11
PLCopen application size 1 MByte 3 MByte
CODESYS version 3.5 3.5

FINNISH KNOWLEDGE

tested, designed and produced in finland.

Epec control systems are made 100% in Finland. We are a control system expert, specializing in intelligent control systems and information systems for even the most demanding conditions. Epec’s organization and processes have been fine tuned to cooperate with large international customers.